top of page
226493,Landing Craft LC 7500 Open - Outboard,Picture 3 (ID 81388).JPG


  • The LC 6500 is a robust landing craft made of high-grade marine aluminum with a 1.1 m (43 in) wide bow ramp.
    The landing craft is designed and tested for excellent and effortless sea handling and maneuverability in rough

  • The V-shaped hull, keel and stringers give stability and protection when landing on rocky shores. The hull is
    divided into three watertight compartments equipped with separate bilge pumps. Moreover, the LC 6500 has a
    protective rubber D80 fender. The landing craft has a high cargo capacity of 1100 kg (2425 lbs) that includes

  • The hull is made of 5 mm (0.2 in) seawater resistant aluminum and welded in accordance with all workboat
    regulation standards. The flat flush self-draining deck has anti-skid aluminum plates. The storage compartments
    below deck are accessible through water tight hatches. The landing craft is equipped with four mooring bollards
    with a heavy duty towing post in the stern and four lifting points.

  • The LC 6500 landing craft is built in accordance with the Finnish Maritime Association (FMA) workboats
    regulations, EU directives and ISO standards.

  • Benefits

    • ​Robust with V-shaped hull

    • Bow ramp

    • Open deck layout

    • Bipolar 12VDC electrical system

    • Low maintenance aluminum

    • Excellent sea handling

    • Front padeye attachment point for easy loading and securing


    • The hull is Mig welded of seawater-resistant aluminum (AlMg4,5-H116). Stiffeners and beams are of
      AlMgSi1 aluminum.

    • The V-bottom angle, together with the keel and stringers provide the boat with excellent course stability
      together with protection of the bottom when landing on rocky shores.

    • The hull is divided in three water-tight compartments equipped with separate bilge pumps.

    • The self-draining deck is made of anti-skid aluminum plate and dimensioned for a max. 500 kg/m² (102
      lbs/ft ²) load.

    • The hull is protected with D80 shape heavy duty rubber fender surrounding the exterior of the landing


    • Single outboard engine 85-150 hp

bottom of page